A Simple Method for Establishing Outdoor Drainage Pipe Models in Revit
When modeling outdoor drainage pipes in Revit, drawings typically provide the elevation of the inner bottom of each pipe segment at both ends. During the modeling process, converting these elevations to the pipe centerline elevation is necessary but can be time-consuming and tedious. Using filters effectively can significantly improve your workflow efficiency.
Here’s a step-by-step approach:
1. Open your Revit file containing the imported drawing. Draw the pipeline according to the elevation at both ends of each pipe segment as shown in the drawing. Note that the pipeline model you draw should represent the pipe center elevation. (See the image)
2. After drawing all models based on the pipe center elevation, go to the Filter Settings menu and create a new filter (e.g., Filter by Pipe Diameter). Select the pipes in the filter list, check only the pipes, and filter by diameter to match the pipe diameters. (See the image)
3. Create a separate filter for each pipe diameter. Hide pipes of other diameters so that only pipes of a specific diameter are visible. Select all visible pipes, switch to the elevation view in 3D, and then move the pipes upward by half the pipe diameter. (See the image)
Why This Method Matters:
In standard practice, modeling outdoor drainage pipes requires continuous conversion and calculation of the elevation from the inner bottom of the pipe to the pipe centerline, which is laborious and time-consuming. This method eliminates the need for extra conversions, enabling you to complete the outdoor drainage pipe modeling process in a clear and efficient manner.
Related Skills
Drawing Settings for Drainage Pipe Bends in Revit
How to Create Plumbing Riser Tag Families in Revit
Must log in before commenting!
Sign Up