In Revit 2013, both ducts and pipes have introduced routing configuration functionality, significantly enhancing the efficiency of drawing complex pipeline systems. Let’s use pipelines as an example to explore this new feature.
First, let’s review the changes in the interface:
As shown in the image below, after clicking Edit Type, there are notable differences in the dialog boxes between Revit 2012 and Revit 2013:
In the 2013 version, under the Pipes and Fittings group, a new parameter called Configuration of Piping System has appeared. Meanwhile, the parameters previously found under the Pipe Fittings family category are no longer present.
Additionally, the Mechanical group has been removed.
Clicking Edit in the 2013 version brings up a brand-new dialog box, as illustrated below:
This dialog reveals a new hierarchical level within the Pipeline Type called Pipe Segment. This allows multiple pipe segments to be defined under a single pipeline type.
This improvement addresses common challenges encountered when drawing pipelines, such as changes in pipeline size, materials, connection methods, and pipe fitting selections. By configuring multiple pipe segments within the same pipeline type, you can efficiently draw pipelines according to these predefined rules without repeatedly switching between different pipeline types.
For example, when drawing fire protection piping, different connection methods may be required depending on pipe size: smaller sizes often use threaded connections, while larger sizes typically use flange connections. With this feature, you can configure a piping system where steel-plastic composite pipes with threaded connections cover sizes from 15 to 100 mm, and cast iron pipes with flange connections cover sizes from 100 to 400 mm.
Once the configuration is complete, simply select the Firefighting pipeline type, and you can easily draw pipelines of varying specifications with the desired connections and fittings.
Must log in before commenting!
Sign Up